Connect with us


This house was completely 3D printed from recyclable materials and assembled in less than a day – Computers



This house was completely 3D printed from recyclable materials and assembled in less than a day - Computers

Although 3D printed houses are not a novelty in architecture, such as House Zeroand solutions for construction on the Moon and Mars are also being explored, The University of Maine claims the first print is 100% recyclable. Unlike other solutions that still use concrete and conventional building materials using 3D printers.BioHome3D intends to be a message of sustainability.

the house was built entirely from wood fibers and bio-resin, a proposal that researchers say could be the solution to the housing crisis currently facing the United States.ūüáßūüá∑ To build the house, the largest 3D printers in the world were used, which were already listed in the Guinness Book of Records and on which the largest 3D boat was previously printed, more than 21 meters long. The university’s Structural Research Unit has recently created a version of the 3D printer that is entirely focused on the use of biological materials.

See the gallery for photos of the house:

BioHome3D is a prototype of about 55 square meters with walls and roof built from sustainable materials. The whole house is fully recyclable, it does not take the usual weeks or months to build, but takes half a day to assemble the parts after printing.With. The electrician manages to electrify the entire structure in just over two hours. After all, not knowing exactly how long it takes to print walls and foundations, a house can be inhabited in a day or two.

And in that sense, he intends to help the US government save on the shortage of materials and labor that fuels the country’s housing crisis. It is mentioned that only Maine is already short of 20,000 homes and 7 million nationwidea problem that dragged on even before the pandemic and, meanwhile, was exacerbated by the lack of raw materials.

See also  Europe is retreating under the pressure of Russian gas. Oil and gold are falling. Euro Falls Slightly - Minute Markets

Watch a video about how a house is printed on a 3D printer:

The researchers explain that construction waste is virtually eliminated due to the precision of the printing process. ‚ÄúOur state is facing the perfect storm of a housing crisis and labor shortage, but the University of Maine is once again demonstrating that it can solve big problems with our ingenious approach,‚ÄĚ the post reads. institution.

O the prototype is equipped with sensors to measure temperature, environment and structure, to check the health of the house during winters in Maine and improve future projects.

Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *


Everything has been delivered. 10 Bugatti Centodieci are already in the hands of the owners



Everything has been delivered.  10 Bugatti Centodieci are already in the hands of the owners

OAll Bugatti Centodieci have been delivered, the Molsheim-based brand said on Monday. Cristiano Ronaldo received the number 07 in October this year. and Bugatti has now revealed that the latest unit – #10 – is already in the possession of its owner.

‚ÄúThe Centodieci combines all the values ‚Äč‚Äčof the Bugatti brand in an extraordinary package: rarity, innovation, heritage, craftsmanship and unrivaled performance. The production batch of 10 units was so in demand by our customers that it was sold before the Centodieci. was even officially presented,‚ÄĚ said Christophe Piochon, president of Bugatti.

This latest example is finished in Quartz White with carbon fiber trim on the bottom and matte grilles. The brake calipers are painted in Light Blue Sport, as is the logo on the rear that refers to the EB110, the iconic Bugatti model that inspired this Centodieci. Inside, the predominant color is also blue, as you can see in the images above.

This block is powered by the same block as the other nine instances. The 8.0-liter W16 with four turbines is capable of developing 1600 hp. In terms of performance, this allows the Centodieci to hit 100 km/h in just 2.4 seconds and reach a top speed of 380 km/h.

Recall that each unit costs the owners eight million euros before taxes.

Read also: We already know when the Bugatti Centodieci fell into the hands of Ronaldo.

Continue Reading


The first Dacia hybrid. “The cheapest hybrid family on the market”



The first Dacia hybrid.  "The cheapest hybrid family on the market"

BUT Dacia revealed this Monday that the hybrid engine has been available since March on the Jogger, the Romanian brand’s model known to be available with a seven-seat variant.

The Jogger Hybrid 140, Dacia’s first hybrid, will hit dealerships in March, but customers can expect and order it as early as January.

The price has been revealed by Dacia and since it’s only available in the seven-seater SL Extreme, it starts at ‚ā¨28,800. The brand claims it is “the most affordable hybrid family car on the market.”

Available in six existing colors to celebrate the launch of this hybrid, there will be a slate gray version, as you can see in the images above.

Equipped with a 1.6 liter four-cylinder petrol engine with 90 hp, the Jogger is also powered by two electric motors (a 50 hp engine and a high-voltage starter-generator). The total power is 140 horsepower. The electric transmission is automatic, four-speed, connected to an internal combustion engine, and two speeds are connected to an electric motor. This combined technology was possible, according to Dacia, only due to the lack of clutch.

Combined with the energy recovery levels of the 1.2kWh (230V) battery pack and the efficiency of the automatic transmission, regenerative braking delivers all-electric traction on 80% of urban journeys and saves up to 40% of fuel compared to a combustion engine vehicle.

Read also: Dual-fuel Dacia Jogger Eco-G. We tried 5 seater and LPG…

Continue Reading


See how Tesla tests its electric Semi truck in the worst-case scenarios



Tesla Semi camião elétrico testes

Tesla has finally been able to bring its long-awaited Semi to market. This electric truck promises to revolutionize transportation and bring all the unique characteristics of this type of electric vehicle to this class of vehicles.

Now that the first units have been delivered, there is hope that they will finally be mass-produced and reach more transport companies. With so many promises to be kept, a new video is now emerging showing Tesla testing its Semi truck under worst-case scenarios.

Tesla Semi is already on the market

Like all Tesla electric vehicles, Semi follows the same line of creating a unique design associated with a platform with the most modern technology available. The proof is in what was presented to the public and surprised most people.

To prove the quality of this new proposal, Tesla published in your LinkedIn account new video. In it, he reveals some of the testing he's done to determine the strength and quality of the Semi's design and its (potential) durability.

Tests to prove its durability

It has been revealed that the Tesla electric truck is subjected to numerous tests and its application in the worst scenarios that drivers may face. It doesn't stop at the ruggedness of the Semi's designs, but goes further and focuses on the motors and batteries themselves.

This is the proof that many have been waiting for to ensure that this new proposal is not limited to a lot of autonomy. Its resistance is great and will provide greater durability, further enhancing the Semi's value and performance.

See also  Banks must allow renegotiation of home loans when the effort rate reaches 36%

high quality electric truck

Tesla has already showcased the Semi's quality with a video showing its truck driving roughly 500 miles on just one charge. The big news here is that he managed to make this long journey with a maximum load of about 37 tons.

Now Tesla remains to widely place the Semi on the market. At the moment, only a few companies have access to this new product, with a very long list of pending deliveries, who want to start mass-using this electric truck offering.

Continue Reading